Blind recording thermometer & data-logger
- Visual display of high & low alarm status
- Push button start or delayed time start
- User settable high and low alarm values
The ThermaData™ logger is a cost effective, self-contained temperature data-logger or blind recording thermometer designed to record the temperature of the surrounding environment. The recording time and sample rate can be easily selected from the software and, unlike most low cost loggers, the ThermaData logger will continue recording during and after downloading the data. By selecting continuous logging it is possible to start the ThermaData logger only once and never have to reset its parameters again, even if downloaded regularly.
The user can set high and low alarm values for an application. A button push will allow a simple visual inspection of the unit to show if either of these limits has been exceeded. An illuminated red LED will warn the user that the alarm limits have been exceeded (reject) or an illuminated green LED will advise the user that the alarm limits have not been exceeded (accept).
The ThermaData logger is housed in a water-resistant polyethylene case and is available in seven colours: blue, white, yellow, green, red, brown and black.
ThermaData PC Software
The ThermaData logger is connected to a PC via a serial port lead. By clicking on the relevant icon the data can be downloaded and displayed either as a graph, table or summary. The information can then be analysed by zooming in, storing to disc or exporting to other software packages.
Specification
Range: -40 to +85°C
Resolution: 0.5°C
Accuracy: ± 1°C (± 0.5°C with calibration utility)
Real Time Clock: seconds, minutes, hours, day, month & year
Memory: 2,048 temperature readings
Sample Rate: 1 minute to 255 minutes
Battery & Battery Life: 3.6 volt lithium - minimum 5 years
Dimensions: Ø55 x 25mm
Weight: 45 grams |
